Skip to main content
holidaysthermostatair filterindoor air qualitySacramento

HVAC Checklist for Holiday Guests: Get the House Ready

PULSE HVAC TeamPublished 5 min read
HVAC Checklist for Holiday Guests: Get the House Ready

Reviewed by Paul R., CEO & Installer

An HVAC checklist for holiday guests comes down to five things: a fresh filter, open guest-room vents, a thermostat taken off its away schedule, fans that keep up with extra cooking and showers, and a system that has been checked before the busiest week of the year. A full Sacramento house at Thanksgiving asks more of your heating than a normal week does. ENERGY STAR estimates that heating and cooling make up as much as half of the energy used in a typical home, so a little preparation pays off in comfort and on the bill.

Work through the list a few days before guests arrive.

Put In a Fresh Filter

Put in a fresh air filter a few days before the first guest arrives. A full house means doors opening all day, more cooking, and more dust and pet hair moving through the rooms, and a clean filter keeps air flowing to every register. ENERGY STAR advises checking the filter every month and changing it at least every three months. If your last change was back in September, this is the week.

Buy a spare while you are at it. If you are hosting through the weekend, or guests bring a dog, you may want a second fresh filter by the time everyone leaves.

Open Up the Guest Room

The guest room is usually the room nobody has thought about since last year. It often doubles as storage, and the supply register ends up under a bed, a stack of boxes or a rolled rug.

  • Open the register fully and clear everything off and around it.
  • Leave the door open for a day or two before guests arrive, so the room warms up and gets air.
  • Check that air has a way back to the return, usually under the door. A door that seals tightly against new carpet can keep a closed room cool.

If the guest room still runs several degrees colder than the rest of the house with the vent open and clear, the problem is usually the duct to that room. Our post on the bonus room over the garage covers the most common version of that.

Set the Thermostat for a Full House

Set the thermostat for the people actually in the house, not the schedule you use on a quiet week. Take it off any away, vacation or deep setback schedule for the visit, so guests are not waking up to a cold house at 6 AM.

Smart thermostats need one extra check. Geofencing switches to away when the phones on your account leave the house. Guests are not on your account. If you run errands on Thanksgiving morning, the thermostat may decide nobody is home. Turn geofencing off for the visit, or use a temporary hold. Our guide to smart thermostat geofencing explains the setting. An ENERGY STAR certified smart thermostat saves about 8 percent on heating and cooling bills in normal use, and pausing its away logic for a few days costs little.

Then plan for the crowd. Every person adds heat, and so does an oven running for hours. Here is how it usually looks on a typical Thanksgiving afternoon: twelve people in a single-story ranch, the oven on since morning, and the thermostat still set to its usual 70°F. By three o'clock the living room is warm and stuffy, and someone opens the front door to cool off while the furnace keeps cycling. Lower the setpoint a degree or two once the crowd arrives, and bring it back up in the evening when the house quiets down.

Run the Fans

Run the bathroom fans and the range hood harder than usual. Extra showers and a full day of cooking put a lot of moisture into the air, and a closed-up house in November holds on to it.

  • Run each bath fan during showers and for about 20 minutes after.
  • Turn the range hood on before the first pot starts to simmer and leave it on until the kitchen clears.
  • Leave the HVAC fan on auto rather than on, so the blower runs only while the furnace is heating instead of pulling kitchen air through the house all day. Our post on holiday cooking and your ducts explains why.

Get the System Checked First

The week before a holiday is the worst time to discover a weak igniter or a dirty flame sensor. If your system has not had a tune-up this season, schedule one now. A tune-up checks the parts most likely to fail when the system runs hard. Even a week or two before Thanksgiving leaves time to fix what it finds.

When to Call PULSE HVAC

Call us for a tune-up before your guests arrive, when a guest room will not warm up with the vent open, or when the system starts short cycling or making a new noise during the busy week. We offer same-day repair across the Sacramento area in most cases.

Call PULSE HVAC at (916) 850-2221 or book a visit online.

Sources

Need HVAC help in Sacramento?

Same-day service · Free estimates · Licensed & insured

Frequently Asked Questions